1. Features of magnesium oxide fireproof board equipment:
1. One machine for multiple purposes, it can produce 5 cm, 10 cm, 15 cm and other thicknesses of light insulation composite flat panels, light insulation composite corrugated panels, building partition walls, large format colored corrugated tiles of various sizes, construction templates, New type of fireproof board, inorganic glass fiber reinforced plastic insulation board for chicken house.
2. The machine adopts double-drive double-roller extrusion process, and the product completes the whole board production line process from sizing, main material, cloth spreading, compounding, and repressing at one time. The production does not require a plastic pallet rack of 20,000 to 30,000 yuan. Investment, equipment automation is high. Greatly reduce the labor intensity of production workers. 3-5 people can produce 700 square meters per day, which is 40% less labor than the traditional manual mode.
3. The thickness of FRP can be adjusted at will (from 2mm-50mm), the flatness difference is 0.001mm.
4. The surface of the product is flat, smooth and dense, realizing the industrialized assembly line production of new building wall panels. 5. This production line can produce corrugated board, wave lap technology, eliminating the cost of flat roof waterproofing, saving 8-15 yuan per square meter.
5. Because this equipment adopts track self-propelled design, the products produced can be stacked 4-6 layers repeatedly on each track, and multiple tracks can be set at the same time, which greatly saves production space.
6. Save template cost. The template used in traditional equipment is very thick, while the template used in our equipment is very thin.
7. Crop orange stems, sawdust, straw (husk), fly ash, etc. can be added to the slurry to realize waste recycling, energy saving, environmental protection, and cost reduction.
2. The main technical parameters of the equipment
Equipment dimensions: length 42 meters × width 7.5 meters × height 5 meters,
Batching equipment: 13 meters long × 4.5 meters wide × 4.5 meters high
3. Production process of foamed cement insulation board equipment
1. Loading and mixing: Add a certain amount of cement, foaming agent, and foam stabilizer to the mixer through the loading system, and dry-mix for 30 seconds;
2. Stirring: Add a certain amount of warm water to the mixer and wet stirring for 2 minutes; add a certain amount of foaming agent to the mixer and stir for 8-15 seconds;
3. Injection molding and foaming: the slurry is then injected into the mold to foam, and the foaming process is about 3-5 minutes;
4. Initial curing: After the injection molding is completed, let it stand for several hours for initial curing;
5. Demoulding: After the initial setting of the foamed cement board is completed, the mould can be demolded when it has the initial strength;
6. Cutting: The insulation board blank with a certain strength can be cut after being demolded, and the cutting specifications can be adjusted according to the needs of the cutting blade;
7. Finished product curing: The curing age of foamed cement board should not be less than 7 days.
4. Production process of inorganic glass fiber reinforced plastic insulation board equipment
1. Adopting the double-drive pair-roller extrusion process, the product completes the whole board production line process from sizing, main material, spreading, compounding, and repressing at one time. The equipment has a high degree of automation, stable operation and arbitrary adjustment of specifications. The surface of the product is flat, smooth and dense, realizing the industrialized assembly line production of new building wall panels. Greatly reduce the labor intensity of production workers.
2. Inorganic glass fiber reinforced plastic insulation board production equipment can produce corrugated board, wave lap technology, avoiding the cost of flat roof waterproofing, saving 3-6 yuan per square meter.
3. The thickness of FRP can be adjusted at will (from 0.2mm-50mm), the average thickness is 0.001mm.
4. Feeding, mixing, spreading, compounding, pressing and forming at one time, 3 to 5 people can produce 700 square meters per day, which is 40% less labor than traditional equipment.
5. Space is saved, 4-7 floors can be produced on each track, which greatly reduces the area occupied (200 m² of factory land for 700m2 board production per day is enough.
6. Save investment. Traditional equipment uses a thick template, while our equipment uses a thin template, which can save investment compared to traditional equipment.