1. C-shaped steel machine 80-300 Philippine punching C-shaped steel machine, cold bending forming machine, roll forming machine. The C-shaped steel tile press is a single-coil forming unit with a set of rolls that can produce a variety of specifications of C-shaped purlin finished products. The machine is mainly composed of passive loading rack, leveling device, punching device, cutting device after forming, hydraulic station, computer control system, etc. This machine adopts automatic flying saw for punching, easy operation and other characteristics.
2. The C-shaped steel product rolled by the C-shaped steel tile press equipment has good tensile, bending and compression properties, good flatness, automatic fixed-length cutting, automatic punching, high degree of automation, quick and convenient installation, and the product can be used for large and medium-sized industries The main force-bearing structure of civil buildings, such as factory buildings, warehouses, hangars, hangars, exhibition halls, theaters, stadiums, bazaars, roof load-bearing loads and wall support. Cold-formed steel is the main material for making light steel structures, and it is made of steel plates or steel strips by cold-formed forming.
3. The wall thickness of the C-shaped steel tile press can be made very thin, and the production process is greatly simplified, and the production efficiency is improved. It can produce various profiles and cold-formed steels of different materials with uniform wall thickness but complex cross-sectional shapes that are difficult to produce by general hot rolling methods.
4. Technical parameters of C-shaped steel tile press
The length of the equipment is 7600mm, the width is 950mm, and the height is 1000mm;
The power of the equipment is 11 kW, and the power of the hydraulic station is 11 kW;
Roller adopts bearing steel (GR15), annealed after forging;
The base is made of 320 I-beam steel;
Use lower five and upper four levels to ensure leveling;
The secondary molding is used to ensure the squareness and right angle of the product, and the upper size can be made;
The thickness of the rolled material is 1.5mm-3mm (the thickness can also be designed according to user requirements);
The width of rolled C-shaped steel is 80mm-300mm;
Rolling speed 8-9m/min;
The use of new-style butt-type adjusting steel sleeve is simple, fast and firm;
The equipment and the produced C-shaped steel square have the advantages of fast adjustment speed, fast punching and fast cutting in the same industry.