Fully automatic steel equipment for greenhouse frame
1. Equipment installation dimensions: 7500mm×1400mm×1200mm
2. Total weight of equipment: about 4000kg
3. Rolling thickness: 1-2mm
4. Electric control system: the whole machine adopts industrial computer PLC control
5. Main motor power: 11KW, hydraulic system power: 3KW, torsion shear power: 7.5KW
6. Working speed: 4000-8000mm/min
7. Pressure of hydraulic station: 10-12Mpa
8. Mould material: Cr12 steel quenched, hardness HR55°-60°
9. Roller material: 45# steel diameter: Ф70mm
10. Thickness of vertical board: 16mm
11. The equipment adopts 1.5 inch chain transmission
12. The upper and lower 14 sets of molds are pre-pressed, and the feeding port is added with flat rollers, and the 3 sets of vertical rollers are straightened, deviated, and rolled after forming.
13. Several steel machines are mainly composed of manual feeding rack, leveling device, punching device, cutting device after forming, hydraulic station, computer control system, etc.
Common specifications are: 70*40, 50*30, and 30*20.
The several-shaped steel rolled by the several-shaped steel machine can be widely used in the construction industry, as a support frame, and can also be used in the coal industry. The equipment can also be used in the construction of greenhouses after bending. Its unique several-shaped structure can be effectively controlled Water droplets flow from the greenhouse.