Brief introduction of electrical cabinet frame forming machine:
Equipment composition
The equipment is mainly composed of automatic feeding machine, leveling \ feeding part, continuous punching part, forming part, cut-to-length part, receiving table, electrical control cabinet and other components.
The equipment produced by our company has the following advantages:
1. The equipment is controlled by PLC, and multiple safety protections are set during normal production.
2. The bed is welded steel plate. And it is tempered to eliminate internal stress and avoid deformation of the fuselage.
3. The forming frame is a cast iron structure and has been tempered. High strength and long service life.
4. The material of the roller shaft is 40Cr, and the hardness is HB280 after quenching and tempering.
5. The material of the forming mold is GCr15, quenched, and hardness: HRC56-62℃.
6. The transmission structure is gear box transmission. Each forming frame has a gear box, which can ensure the equipment overtime, high intensity operation and long service life.
Coiler, straightening machine, feeding part, continuous stamping equipment, forming part, position and cutting device, collecting table, electrical control system, etc. The width is 220 mm, the diameter of the roller shaft: 50 mm, the material is steel.